0 €
14 days of Swept Path. No card.
- Every vehicle and every check
- Key sent by email
Tero by BeletageModules for ArchicadWindows and macOS
Archicad tools, from the ground up.
Tero is a growing set of modules for Archicad, made by the architects at Beletage. Swept paths come first. AI renders and films, an assistant that works in your model and GIS tools follow, all in the same installer.
One installer. One key unlocks every module you own.
SheetT-00
One installer. A growing set of modules.
Buy only what you use. The same key unlocks every module you own, in Archicad 27 to 30, on Windows and macOS. New modules arrive as updates.
T-01
Swept Path
Vehicle paths drawn live in your plan, with exact clearance, reversing, docking, ramps and headroom.
First at launch29 € project, 99 € year T-02Render and Film
The 3D view you are looking at, rendered with AI in about a minute, then clips, orbits and walk-throughs.
In developmentOn credits T-03Assistant
Ask in plain language. It works in your model with Archicad's own tools, and you approve every change.
In developmentOn credits T-04Geo
GeoPackage and DXF in your national coordinate system, coordinate grids, spot coordinates and tables.
PlannedYearly licence T-05Your module
Tell us what slows you down in Archicad. The next module may start with your answer.
On requestWrite to usMade and supported by Beletage, Cluj-Napoca.Business prices exclude VAT. Consumer totals will include applicable VAT.
SheetT-01
Swept Path
Will the fire engine make the corner? Will the semitrailer clip the bollards? Drag the route below and see. In Archicad, Tero does this live in your plan, forwards and in reverse, up ramps and under beams.
- Vehicles
- 13, more on request
- Archicad
- 27, 28, 29, 30
- Platforms
- Windows, macOS
- Checks
- Body sweep, wheels, ramps, headroom
- Runs
- On your computer, nothing uploaded
- Price
- 29 € project, 99 € year
Drag the round handles
Steering used
0°
Conflicts
0
Route
0 m
A simplified preview that runs in your browser. In Archicad, Tero sweeps the exact body in 5 cm steps, reverses, docks and checks ramps and headroom.
01
Live while you draw
Click the route in plan. The swept area, wheel paths and clearances redraw at every click, with a small palette next to the cursor.
02
Every conflict, exactly
The body sweeps continuously in 5 cm steps against the walls, kerbs, columns and other routes you select, with your safety distance.
03
Reverse and dock
Back a semitrailer the way a driver would, or let Tero plan the manoeuvre into a loading bay, aligned with the ramp.
04
Ramps and headroom
The vehicle rides your slopes and vertical curves on its four wheels. Tero checks ground clearance and the underside of beams, slabs and lintels.
05
One object, still editable
Each route is a single library object. Move or rotate it with the usual tools, change the vehicle, and it recomputes from your steps.
06
Made for real sites
Guides for parallel and perpendicular moves, your own safety distance, and vehicle values you can enter in Details.
Pick the vehicle
Thirteen are ready, from a car to a 16.5 m semitrailer, each with the chassis it is modelled on.
Select the carriageway and the obstacles
Take them from your selection and set the safety distance. Tero checks against exactly what you picked.
Click the route
Forward, reverse or to a loading bay. Red means a conflict, and it moves as you move the route.
Thirteen vehicles, each modelled on a real chassis.
Every dimension comes from the manufacturer data sheet, and the add-on tells you which one. Drawn at the same scale. Missing one? We add it on request.
SheetT-02
Render and Film
Render the 3D view you are looking at, in about a minute, then make it move. Already working in our add-on in Romania, coming to Tero next.
Pick the light, the season and the style, write what you want to see in any language, and choose a free local render, a quick sketch or a final 2K image. Up to four variants at a time, and you keep the one you like.
Up to four variantsUpscaleClip from a variantOrbit around the buildingFly-inWalk along your pathBefore and after films
SheetT-03
Assistant
Ask in plain language. It reads your layers, zones and elements, works with Archicad's own tools, and nothing changes until you approve.
Assistant
Ask about your project
Illustration of the Assistant palette, with the kind of requests it handles.
360tools, from walls and doors to properties, renders and swept paths
1undo step for every change it makes
0changes without your approval
SheetT-04
Geo
Survey and GIS data in the coordinate system your country uses, into Archicad and back out again.
ETRS89 / UTM zone 32N
- GeoPackage and DXF import and export, with their attributes
- Coordinate grid crosses for site plans, at round values
- Spot coordinates and coordinate tables for a parcel
- The national grid you work in, picked once per project
Tap a coordinate system on the plan to relabel the same site.
SheetT-05
Your module
What slows you down in Archicad? Every Tero module started as a tool we needed ourselves. The next one may start with your answer.
Write one or two sentences about the task. We read every one, and we write back when a module you asked for, or one of those below, opens.
SheetT-06
Pay per module.
For one project or for the year, with no automatic renewal. The prices below are business prices excluding VAT. Consumer totals will include applicable VAT before ordering. Eligible businesses in other EU countries can use reverse charge with a valid VAT number.
29 €
90 days on one computer.
- Everything in Swept Path
- One planning application
- No automatic renewal
99 € / year
365 days on three activated computers, every module update included.
- Everything in Swept Path
- Support by email
- Three computers, one key
At launch
Render and Film and the Assistant run on credits. Geo will be a yearly licence. Everything works with the same key.
Hear firstInitially available in Romania and to businesses in other EU countries with a verified VAT number. More countries will follow. Terms of sale and withdrawal rights. In Romania, the project costs EUR 35.09 and the year EUR 119.79 including 21% VAT. No automatic renewal.
Made by architects, for architects.
Tero is made by Beletage, an architecture practice in Cluj-Napoca, Romania. We build Archicad tools for our own projects first, and open them to everyone once they have proved themselves on our desks. You write to the people who make it.
beletage.roSheetT-07
Before you install.
Which module launches first?
Swept Path. Render and Film, the Assistant and Geo follow in the same installer. Leave your email on sheet T-05 and you hear first.
Which Archicad versions does it run on?
The target is Archicad 27, 28, 29 and 30 on Windows and macOS. The download page lists the installers and compatibility that have been verified. We test with the international English version of Archicad.
Is my project sent anywhere?
Not by Swept Path. It computes everything on your computer and only checks your licence key online. The AI modules say clearly what they send, before they send it.
Can I match the vehicles on my site?
Yes. Start from the closest of the thirteen and enter your own values in Details, such as the wheelbase. If a vehicle is missing, send us its data sheet and we add it.
How do invoices and VAT work?
Beletage SRL, Romania, is the seller. Eligible businesses in other EU countries can use reverse charge with a verified VAT number. Purchases in Romania include 21% VAT. The final total is shown before payment. Consumer purchases are initially available only in Romania.
Who makes Tero?
Beletage, an architecture practice in Cluj-Napoca, Romania. Tero brings the Archicad tools we build to architects in other countries.
Start with Swept Path.
We send a 14-day key and the installer link to your email. Paste the key into Archicad and the module opens.